Working Principle of Plate and Belt Elevator

The belt elevator is driven by the driving device to rotate the driving drum, the friction between the driving drum and the belt makes the belt move, and the belt drives the material upward at a certain angle in the running process.

Working Principle

The belt elevator is driven by the driving device to rotate the driving drum, the friction between the driving drum and the belt makes the belt move, and the belt drives the material upward at a certain angle in the running process. The tensioning device ensures that the belt is always under tension to ensure the stability and reliability of the lifting process.
Characteristics
Large conveying capacity: the width of the belt is large, which can carry more materials and is suitable for the rapid lifting of materials in large-scale vegetable processing lines.
Higher lifting height: the materials can be lifted to a higher position according to the layout and process requirements of the production plant to meet the needs of different processing stages.
Smooth running: the movement speed of the plate belt is relatively stable, and the contact area with the material is large, which can make the material keep smooth in the lifting process and reduce the material breakage and spillage.
Convenient maintenance: the structure is relatively simple, and the installation and dismantling of each component is relatively convenient, which facilitates daily inspection, repair and maintenance, and reduces the maintenance cost of the equipment.
Strong applicability: according to the characteristics and processing requirements of different vegetables, suitable material and surface structure of the plate and belt can be selected to adapt to the lifting and conveying of all kinds of vegetables, such as leafy vegetables, roots and stems.
Maintenance points
Regularly check the plate belt: check whether the plate belt is worn, broken, deformed, etc., especially the edges and connections of the plate belt, if damaged, it should be replaced or repaired in time to prevent material leakage or the plate belt from falling off.
Check the driving device: regularly check the running condition of the motor and reducer, including temperature, noise, vibration, etc., to ensure their normal operation. Meanwhile, replace the lubricant according to the specified time interval to prolong the service life of the driving device.
Adjust the tensioning device: check the tensioning degree of the plate belt frequently and make appropriate adjustments through the tensioning device to avoid the plate belt being too loose or too tight. Too loose will cause the belt to slip, affecting the lifting efficiency; too tight will increase the wear and tear of the belt and drum.
Clean the equipment: clean the surface of the plate belt and hoist around the vegetable residues, dust and other debris in a timely manner to prevent them from entering the equipment, affecting the normal operation of the equipment. At the same time, keep the surface of the drum clean to avoid material adhesion resulting in the belt running away.
Check the roller: check the wear of the roller, if there is uneven wear or surface damage, it should be repaired or replaced in time. In addition, make sure the rotation of the drum is flexible and the bearings are well lubricated to reduce the running resistance.